DirectOut Technologies EXBOX.64

MADI Signal Converter, Re-clocker and Extender

DirectOut Technologies EXBOX.64 2017-10-06T16:09:48+00:00

Project Description

DirectOut Technologies EXBOX.64

The DirectOut EXBOX.64 is an active signal converter, re-clocker and extender for MADI signals. It has one MADI optical and one MADI coaxial I/O and signals can be converted either way, coaxial to optical or optical to coaxial. The input signals, which don’t need to be in sync, are cross patched to the corresponding output and the output signal is re-clocked at the output.

The input signal is bit transparent allowing other MADI formats (AES10) to pass through unchanged.

The EXBOX.64 is equipped with two external power supplies fitted with secure Hirose connectors for safe operation and redundancy.

The output signal of the coaxial port is electrically refreshed and with the addition of a short fibre optic loop, the range of BNC cabling may be extended from approximately 100m to 200m or with a short coax loop, the fibre optic connection can be similarly doubled from 2km to 4km for multimode fibre.

A signal will not be output unless a valid input signal has been detected at the corresponding input port.

Technical Specifications

  • MADI ports:1 x SC-Socket multi/single mode
  • 1 x coaxial BNC, 75 ohm
  • MADI formats:48k / 96k Frame, 56 / 64 channel, S/MUX
  • Sample Rates:44,1 kHz up to 192 kHz
  • Power supply:external, 2 x Hirose (9-24 V) 1x PSU supplied, 1x redundant PSU option
  • Dimensions:Width 140 mm
    Height 42 mm
    Depth 140 mm

Brochures

DirectOut EXBOX.64 Brochure – PDF

Manuals

DirectOut EXBOX.64 Manual – PDF

Related Products

Our Partners